7 inch Ceramic Bass / Midrange driver with damped cone.
The Accuton C173-6-191E Bass / Midrange is an esoteric 7 inch unit primarily intended for small floorstanders and bookshelf monitors.
Developed from the C173-6-095E, this drive unit features precision cut apertures in the diaphragm which critically damp the 4kHz cone resonance resulting in a much smoother midrange performance as can be seen on the downloadable datasheet. The maximum excursion of 10mm ensures good SPLs from small cabinets.
This state of the art driver features a ceramic cone with soft rubber surround and an impressive motor system comprising a very large ferrite magnet and 38mm titanium voice coil former. The spider, pole piece and coil former are fully ventilated for minimal compression. This 6 ohm unit has a power rating of 120 watts .
Full datasheets can be downloaded from the bottom of this page.
Here are some box alignment examples:
Vb: 10L, Port diameter: 50mm, Length: 250mm, Fres: 45Hz, F-3dB: 51Hz, Q: 0.58 (optimal)
Vb: 14.5L, Port diameter: 50mm, Length: 175mm, Fres: 43.5Hz, F-3dB: 44Hz, Q: 0.50 (extended bass)
Vb: 8.5L, Port diameter: 50mm, Length: 260mm, Fres: 48Hz, F-3dB: 56Hz, Q: 0.61 (0.7dB Ripple @ 100Hz)
Vb: 6L, -13.5dB @ 40Hz, F-3dB: 80Hz, Q: 0.71 (typical)
Vb: 19L, -10dB @ 40Hz, F-3dB: 89Hz, Q: 0.50 (extended bass)
A matching passive radiator is available : Accuton P173
- Ultra hard ceramic cone (Corundum / Sapphire)
- 173mm diameter chassis with protective grille
- High power 38mm voice coil assembly
- Underhung motor, titanium VC former
- Damping apertures in diaphragm
- Very large ferrite magnet
- Long throw max. 10mm
|Resonant frequency (fs)
||DC resistance (Re)
|Mechanical Q factor (Qms)
|Electrical Q factor (Qes)
|Total Q factor (Qts)
|Equivalent volume (Vas)
Click icons to download :
Data 3D View (large file)
Built to order - please contact us for a lead time.