All systems go !
All systems go !
DRIVE UNITS BY MANUFACTURER:
DRIVE UNITS BY MANUFACTURER:
SPH-135C
DISCONTINUED BY MANUFACTURER - LAST BATCH, NO MORE AVAILABLE AFTER THIS.
The SPH-135C is a versatile drive unit from the Monacor 135 series featuring a woven carbon fibre cone, vented pole piece and diecast chassis. When mounted in correctly aligned cabinets this long throw unit is capable of reproducing bass that is surprisingly deep and accurate - ported cabinets of around 14 litres can give an in room response extending down into the upper 30s (Hz) which is excellent for a driver of this size.
A fine replacement unit for a wealth of mainstream designs requiring a high quality 5¼ bass driver such as Rogers, Castle, Mission etc. Full details and dimensions can be found on the downloadable datasheet.
Resonant frequency (fs) | 40 Hz | Nominal impedance (Zn) | 8 Ω |
Mechanical Q factor (Qms) | 4.48 | DC resistance (Re) | 6 Ω |
Electrical Q factor (Qes) | 0.43 | RMS power handling | 50W |
Total Q factor (Qts) | 0.39 | Sensitivity (2.83V/1m) | 88 dB |
Equivalent volume (Vas) | 17L | Chassis diameter (pincushion profile) | 133 mm |
SPH135C, SPH 135 C
Thanks for the review Graham !
Will & Caroline
Great update to the original Castle drivers which started to crack anround the edges after many years of service.
More bass response and energy when playing rock tracks.
Would note that driver surround is slightly larger than original.
Thanks for the review Ian!
Will & Caroline
Ordered two of these to replace the original Castle IsIs units as over a period of 35 years the polypropylene cones had gone brittle due to UV degradation, a common occurrence, units arrived in quick time and came securely packed, they took 20 minutes to solder in and slipped straight in, they sound better than the original units as they develop quite a bit more bass something the originals were very light on, very good build quality, and most importantly, a very good sound quality I’ve just acquired a a pair of Castle Avons for £60 that need the same upgrade, I will certainly buy these again from Willys very competitively priced with a quick efficient service 10/10
Thanks very much Willys HIFI
Thankyou for your review !
Will & Caroline
Friendly technical support
40+ years in the trade
UK family run business
Excellent customer service
Quick dispatch
Great service as always quick delivery
Thanks
Ordered two of these tweeters on Friday afternoon NZ time, amazingly they had arrived in Auckland the following Tuesday morning, arrived in my home town of Christchurch couple of days later and were promptly installed. Seem to be doing and sound as they should, thank you for your service!
Excellent service well packed and very happy with tweeter after the work had been done.
Definitely would use again
Excellent advice once again from Will so helpful. Bought and installed I was a bit apprehensive about soldering direct to the terminals including the speaker terminals but took my time and with the guidance of will these have transformed my speaker's to a completely different level. Detail clarity is outstanding brings out subtle Nuance's. I'm so glad I replaced my existing crossovers with these they are better than I could have imagined and are excellent value.
Thanks again for outstanding service.
Gary
I am a big fan of the linn range of speakers , particularly the Keilidh and Kaber models . They are well designed and extremely well constructed. Anyone thinking of taking the step on this tweeter upgrade I would say do not hesitate.! I have a passive pair of Kaber with the 3bar Linn mk2 tweeters and these are generally accepted as a decent improvement over the early ceramic versions. These OW02 Hiqufon went into my active pair of Kaber and they are in a different league in my opinion!! I am a returning customer to Willys Hifi and always get great service, items arrive on time and well packaged. Thanks for being the go-to website when it comes to thinking about my next project or upgrade! Regards Ianpop.