All systems go - we are extremely busy at the moment
All systems go - we are extremely busy at the moment
DRIVE UNITS BY MANUFACTURER:
10F/8424G00
UK STOCK ITEM
Good replacement for the legendary 13M/8636, very similar response / sound charcteristics. Note this driver has a smaller diameter.
This is a high quality 10cm full range drive unit offering a wide and smooth frequency response, great imagery and top notch construction. Featuring a coated NRSC glass fibre cone, copper capped pole piece and vented alloy chassis, this unit is capable of very pleasing results & sounds excellent partnered with a class T amplifier. Great for a small active system project.
Equally at home as a full range in small reflex enclosures or as a very fine midrange in larger designs.
Downloadable datasheet is available at the bottom of this page.
This driver is 8 Ohms - the 4 Ohm version is here: 10F/4424G00
Resonant frequency (fs) | 90 Hz | Nominal impedance (Zn) | 8 Ω |
Mechanical Q factor (Qms) | 3.49 | DC resistance (Re) | 5.8 Ω |
Electrical Q factor (Qes) | 0.41 | RMS power handling | 15 W |
Total Q factor (Qts) | 0.37 | Sensitivity (2.83V/1m) | 86.6 dB |
Equivalent volume (Vas) | 2.1L | Chassis diameter | 97.5 mm |
Excellent replacement for my Ruark CL30 floor speakers. Quick delivery and clear helpful website…
Thanks for the review Iain !
Will & Caroline
Friendly technical support
40+ years in the trade
UK family run business
Excellent customer service
Quick dispatch
Replaced faulty Studio 0.5 drivers with these. Had a wobble about the fit so called to confirm details and had superb advice. Recommend both the drivers and Willy's!
I've been repairing a set of vintage speakers (Rogers JR149's) and honestly, I wouldn't have been able to do it without components and parts from Willy's Hi-fi! Thanks for the help and advice as well!
Quick shipping and high quality cloth. Very easy to work with and sticks well with contact adhesive. Very pleased with the final look!
Thanks to Will for advising on a replacement for these classic Arcam speakers from the early 90s. Good value and quick shipping. This was a small restoration project on this sealed box design - these now sound punchy, crisp and clear and really fill the room. Tweeters seem to still be breaking in as the detail and imaging just keeps getting better! Looking forward to coming back for parts for the next project!
I needed to renew the foam fabric around my JR149 loudspeakers. Age and UV light had caused them to start disintegrating - not helped when one of our cats decided to assist with her own paws!!
Googled and up came Willy's details. I confirmed that I needed two of the "large" sheets and paid by Paypal. Order promptly dispatched and JR149s cosmetically restored!