All systems go !
All systems go !
DRIVE UNITS BY MANUFACTURER:
Morel CAT 328-104 Tweeter
Categories: 0.75 - 2" (19-50mm) Dome Tweeters Morel Tweeters
104mm faceplate version
UK STOCK ITEM
The Morel CAT 328-104 is a modern updated version of the legendary MDT-32S with a 104mm faceplate. Featuring a field replaceable 28mm Acuflex textile dome, a large ferrofluid cooled Hexatech aluminium voice coil, a vented ferrite magnet system and a critically tuned / damped rear chamber, this tweeter is remarkably transparent and is a very good performer at this price point. Recommended frequency use: 2000-20,000 Hz. Substantial power rating of 200w nominal, 1000w peak.
A full datasheet can be downloaded from the bottom of this page.
Resonant frequency (fs) | 650 Hz | Nominal impedance (Zn) | 8 Ω |
Effective diaphragm diameter | 28mm | DC resistance (Re) | 5.2 Ω |
Ferrofluid ? Y/N | Yes | RMS power handling | 200W |
Recommended crossover | 2khz | Faceplate diameter | 104mm |
Sensitivity (2.83V/1m) | 90 dB | Cutout hole diameter | 72 mm |
CAT328
The MOREL CAT-328 is the recessed plate version of the CAT-308. The primary advantage of the recessed plate is that it minimizes the mild horn loading coloration that the CAT-308 faceplate creates.
There are two versions however: A 110 mm diameter version and a 104 mm version. The 104mm version takes up less front baffle space.
The MOREL CAT-328 is a very rugged, high quality tweeter. It can be crossed over at 4KHz, 6dB per octave without burning out. It also has excellent dynamic response without compression and it sounds very detailed and airy.
Thanks for the review - we agree, this is a great tweeter !
Will & Caroline
Friendly technical support
40+ years in the trade
UK family run business
Excellent customer service
Quick dispatch
Swapped out the 30 yr old AlCap capacitors for the Audyn Q4 on Wills recommendation (along with a ferrofluid change). What a difference, added so much more definition and clarity. Very impressed. Audyns are a fair bit bigger size wise but fitted easily enough on the board and the access aperture on the TDL Studio 1's.
Good quality, fast postage, perfect! Thanks
Can fault the service and you always seem to have what others don’t, this can be critical when your hobby involves restoring vintage hifi .
Excellent driver and superb service and advice from Willy's hi-fi. Would certainly recommend and I will definitely be using again. Super fast delivery and great prices
They offer great advice genuinely helpful and knowledgeable.
Excellent service.
Very happy with this replacement part, especially once id fitted it correctly!! Sounds great so know where to go when the other one fails. 👍