All systems go !
All systems go !
DRIVE UNITS BY MANUFACTURER:
D2004/602000
Categories: 0.75 - 2" (19-50mm) Dome Tweeters Scanspeak Tweeters

This compact 20mm soft dome tweeter provides a high degree of mounting options; it is possible to install it in very confined spaces or close to the bass / midrange unit in order to minimise any crossover lobing. The diminutive size does not compromise the sound quality; this compact unit is fully comparable to the renowned full size Illuminator and Revelator tweeters and is ideal for small high-end monitors and custom in-car applications.
Neodymium magnets are far more powerful than their traditional ferrite counterparts allowing compact chassis styles - all of the Illuminator compact tweeter range feature Neodymium magnets offering a level of performance that belies their size.
A full datasheet can be downloaded from the bottom of this page.
| Resonant frequency (fs) | 600 Hz | Nominal impedance (Zn) | 4 Ω |
| Effective diaphragm diameter | 20 mm | DC resistance (Re) | 2.8 Ω |
| Ferrofluid ? Y/N | No | RMS power handling | 50W |
| Recommended crossover | 3 kHz 12dB | Faceplate diameter | 56mm |
| Sensitivity (2.83V/1m) | 88.4 dB | Cutout hole diameter | 43 mm |
Friendly technical support
40+ years in the trade
UK family run business
Excellent customer service
Quick dispatch
Excellent upgrade, works perfectly with the speakers it's just soldier and play, they takeaway the over intensity of the original tweeters.
I've had my Mission 734s for about 30 years and for the last five or so the bass units have been falling to pieces. I was about to take the speakers to the tip, but didn't have the heart knowing how capable these used to be. I did a little internet research and these Monacor replacements appeared to do the job. Next day delivery from Willys was impressive, as was the killer sound once the replacements were fitted (which was a simple job). I'd forgotten how these speakers make the windows rattle. Very happy customer!
Excellent service from Willys-Hifi. Caroline was very helpful and patient when answering my queries. Please be aware that some soldering is required when connecting the tweeters. Something I haven't done since I was at school over 40 years ago! They do sound good though, listening to Smoke on the Water as I write , wow 😆
thx you so much for helping me geting the twiters for my speakers i hope all good for your bisnis in the futur and that it will never close i recemed you to the norwigen hifikluben its a store in norway for parts and hifi so you brobely will get order from ther now thx agine for the parts btw you need to put a bit of fome on the back side of the speakers for it to mount in the b&w cmd1 se to make them fit i will leave som pictur of the istalsjon
I always knew that Linn should never have stopped using Hiquphon tweeters. What I don't know is why it's taken me thirty years to fit a pair in my old Kabers. It's often hard to describe sonic character ....but to pinch Linn's old line from back in the day ...they're Simply Better.(even straight out the box with soldering iron still warm)
As my Kabers are passive,I had been a little concerned that the the 8 ohm nominal impedence of the OW1 would mess with the crossover slope. I needn't have worried....if its shifted the crossover point its much for the better.
Warm thanks also to Will and Caroline for a service in keeping with the outstanding quality of the Hiquphon product.
Alan
