New workshop now open - all systems go!
New workshop now open - all systems go!
DRIVE UNITS BY MANUFACTURER:
P830667 SLS-213
UK STOCK ITEM
The Peerless P830667 SLS-213 is an 8 inch 8 ohm woofer / bass driver from the highly regarded SLS series featuring a coated hard paper cone, a fully ventilated steel chassis, a Faraday shorting ring in the motor system and long throw suspension. High Qts design specifically for strong bass reproduction; suits sealed box 3 way systems or subwoofers. Some care needs to be taken with reflex designs.
Resonant frequency (fs) | 46 Hz | Nominal impedance (Zn) | 8 Ω |
Mechanical Q factor (Qms) | 7.21 |
DC resistance (Re) | 5.6 Ω |
Electrical Q factor (Qes) | 0.83 |
Max power handling | 90 W |
Total Q factor (Qts) | 0.73 |
Sensitivity (2.83V/1m) |
86.5dB |
Equivalent volume (Vas) | 19L | Chassis diameter |
213mm |
Friendly technical support
40+ years in the trade
UK family run business
Excellent customer service
Quick dispatch
Very happy with this replacement part, especially once id fitted it correctly!! Sounds great so know where to go when the other one fails. 👍
Just as expected. Works perfectly as a subwoofer @400Hz in a mono bi-amped active internet radio set up in my study. Thanks!
Bought a pair of these to replace the failing drivers in my 20 year old Alesis M1 Active Mk2s. They are physically a near perfect match for the cabinets and are a good match electrically for the amplifier, but sound better than the original drivers. The only slight complication is the original drivers use one 2.8mm and one 4.8mm spade terminal, so you need to change one of the connectors. These have given my old monitors (now my 'kitchen speakers') a whole new lease of life. Next step is to replace the rubber surrounds with a grille.
There is a detailed review of these drivers over on youtube: https://www.youtube.com/watch?v=NCb-rzCSK2s
Great service from Willys. They were dispatched straight away and arrived next day, very well packed.
I recently installed the Linn Keilidh active Tweeter Upgrade Kits from Willys Hifi. It works great! It took
1 month to get here snd had to pay an additional 90 euros in taxes and customs fees but it was well worth it!
The foam grill covers of my Mission 770s crumbled into dust many years ago. Only recently was I able to find what I thought would be a suitable replacement. Everything about the process went smoothly. The foam cut easily, looks good and, to my ears , is audibly transparent.