DUTY PAID SHIPPING TO THE USA NOW AVAILABLE !!
DUTY PAID SHIPPING TO THE USA NOW AVAILABLE !!
DRIVE UNITS BY MANUFACTURER:
OC25SC65-04
REPLACES VIFA 0C25SC05-04.
This tweeter features a 25 mm 4 ohm voice coil, a damped fabric dome giving a smooth frequency response and ferrofluid in the gap of the neodymium magnet for enhanced cooling of the voice coil. Twist-lock bayonet mounting for easy installation into custom faceplates / baffles. A full datasheet can be downloaded from the bottom of this page.
Can be supplied specially modified and prepared for easy replacement in the following B&W models:
P4, P5, CDM1, CDM7SE. Not suitable for P6 or NT models.
Excellent replacement for Mission M7, M71, M72, M73, and so many others.
Resonant frequency (fs) | 1382 Hz | Nominal impedance (Zn) | 4 Ω |
Effective diaphragm diameter | 25 mm | DC resistance (Re) | 3.0 Ω |
Ferrofluid ? Y/N | Yes | RMS power handling | 25 W |
Recommended crossover | 2.5 kHz 12dB | Faceplate diameter | - |
Sensitivity (2.83V/1m) | 93.1 dB | Cutout hole diameter | - |
Peerless by Tymphany
thx you so much for helping me geting the twiters for my speakers i hope all good for your bisnis in the futur and that it will never close i recemed you to the norwigen hifikluben its a store in norway for parts and hifi so you brobely will get order from ther now thx agine for the parts btw you need to put a bit of fome on the back side of the speakers for it to mount in the b&w cmd1 se to make them fit i will leave som pictur of the istalsjon
Thanks for the review Jeb !
Will & Caroline
Very good. A chance it does replace old inaudible tweeters
Thanks for the review Pascal !
Will & Caroline
Tweeter has been shipped very quickly and is working perfectly now. One point to mention is, that it did not fully fit mechanically as replacement as it was announced, had to rework mounting part slightly
Thanks for the review !
Will & Caroline
New tweeters bought as a replacement for B&W CDM1SE. Willy's fitted them in my existing housings and delivered promptly. Full marks!
Thanks for the review Jonathan!
Will & Caroline
Great tweeter, replaced some B&W CDM1 tweeters that the ferrofluid has ceased up in and these sound even better I think, not quite as harsh.
Bit tricky to fit as they are slightly different but easy enough with a bit of common sense
Thanks for the review Chris !
Will & Caroline
Friendly technical support
40+ years in the trade
UK family run business
Excellent customer service
Quick dispatch
I've had my Mission 734s for about 30 years and for the last five or so the bass units have been falling to pieces. I was about to take the speakers to the tip, but didn't have the heart knowing how capable these used to be. I did a little internet research and these Monacor replacements appeared to do the job. Next day delivery from Willys was impressive, as was the killer sound once the replacements were fitted (which was a simple job). I'd forgotten how these speakers make the windows rattle. Very happy customer!
Excellent service from Willys-Hifi. Caroline was very helpful and patient when answering my queries. Please be aware that some soldering is required when connecting the tweeters. Something I haven't done since I was at school over 40 years ago! They do sound good though, listening to Smoke on the Water as I write , wow 😆
thx you so much for helping me geting the twiters for my speakers i hope all good for your bisnis in the futur and that it will never close i recemed you to the norwigen hifikluben its a store in norway for parts and hifi so you brobely will get order from ther now thx agine for the parts btw you need to put a bit of fome on the back side of the speakers for it to mount in the b&w cmd1 se to make them fit i will leave som pictur of the istalsjon
I always knew that Linn should never have stopped using Hiquphon tweeters. What I don't know is why it's taken me thirty years to fit a pair in my old Kabers. It's often hard to describe sonic character ....but to pinch Linn's old line from back in the day ...they're Simply Better.(even straight out the box with soldering iron still warm)
As my Kabers are passive,I had been a little concerned that the the 8 ohm nominal impedence of the OW1 would mess with the crossover slope. I needn't have worried....if its shifted the crossover point its much for the better.
Warm thanks also to Will and Caroline for a service in keeping with the outstanding quality of the Hiquphon product.
Alan
Been looking for a supplier of replacement drivers for some years.
Willy's HiFi had just the parts at a good price and they arrived in a couple of days.