All systems go !
All systems go !
DRIVE UNITS BY MANUFACTURER:
18W / 8531G00
UK STOCK ITEM
The Revelator 18W series of drivers continue the enviable trend set by the smaller 15W versions. There's a few variants and different impedances - they are all excellent. This version is available in 4 and 8 Ohms. A full datasheet is available for download at the bottom of this page.
Popular among high end & esoteric designers - and with very good reason.
Featuring a unique cone that is precision sliced then re-bonded with damping glue; this procedure gives a very high level of internal damping and control that is not normally obtainable with a standard type cone.
These no compromise drive units offer superlative sound quality with outstanding midrange resolution and solid bass extension.
This woofer is 8 Ohms ; the 4 Ohm version is here : 18W/4531G00
Resonant frequency (fs) | 28 Hz | Nominal impedance (Zn) | 8 Ω |
Mechanical Q factor (Qms) | 5.10 | DC resistance (Re) | 5.8 Ω |
Electrical Q factor (Qes) | 0.39 | RMS power handling | 60 W |
Total Q factor (Qts) | 0.36 | Sensitivity (2.83V/1m) | 87 dB |
Equivalent volume (Vas) | 58.2L | Chassis diameter | 182.2 mm |
Friendly technical support
40+ years in the trade
UK family run business
Excellent customer service
Quick dispatch
Wow, just had my Mission 753 upgrades of crossover and also tweeters. What a difference it’s made! The high frequencies are more refined and OMG, the separation and richness of mud and bass if awesome…..much thanks to Willy’s for giving my 753’s a new life 😀😀
Excellent advice from will as usual and exactly what I wanted. These have improved the sound of my current speakers and taken them to another level. Sounds superb I can hear tonal difference's between things that I never heard before. Superb bass drivers dig so deep.
As usual will has been outstanding.
Brilliant to deal with always helpful and gives great service.
What a brilliant capacitor, from first listen exceptional clarity and depth. Bargain will be buying more.
Swapped out the 30 yr old AlCap capacitors for the Audyn Q4 on Wills recommendation (along with a ferrofluid change). What a difference, added so much more definition and clarity. Very impressed. Audyns are a fair bit bigger size wise but fitted easily enough on the board and the access aperture on the TDL Studio 1's.
Good quality, fast postage, perfect! Thanks