All systems go ! miniDSP UMIK-1 back in UK stock.
All systems go ! miniDSP UMIK-1 back in UK stock.
DRIVE UNITS BY MANUFACTURER:
R3004/602010
Categories: 0.75 - 2" (19-50mm) Dome Tweeters Scanspeak Tweeters
From the excellent Illuminator range, this 26mm ring dome tweeter features an alloy phase correction plug, neodymium magnet assembly and a large damped rear chamber. The broad frequency response is excellent and this unit offers a very low resonant frequency (fs) of just 420 Hz. The low fs significantly eases crossover design.
The small size of this unit does not compromise the sound quality; these compact tweeters are fully comparable to the renowned full size Illuminator and Revelator tweeters. Excellent for high quality in-car installations ~ be mindful of the rear chamber depth if considering mounting in the doors; full dimensions can be found in the downloadable datasheet at the bottom of this page.
All of the Illuminator compact tweeters feature Neodymium magnet assemblies, these are far more powerful than their traditional ferrite counterparts allowing for a range of compact drive units that offer a level of performance belying their size.
Ideal for high-end compact monitors and esoteric in-car applications.
Resonant frequency (fs) | 420 Hz | Nominal impedance (Zn) | 4 Ω |
Effective diaphragm diameter | 26 mm | DC resistance (Re) | 3 Ω |
Ferrofluid ? Y/N | No | RMS power handling | 50W |
Recommended crossover | 2.5 kHz 12dB | Faceplate diameter | 62mm |
Sensitivity (2.83V/1m) | 87.4 dB | Cutout hole diameter | 50 mm |
Friendly technical support
40+ years in the trade
UK family run business
Excellent customer service
Quick dispatch
Bought a pair of these to replace the failing drivers in my 20 year old Alesis M1 Active Mk2s. They are physically a near perfect match for the cabinets and are a good match electrically for the amplifier, but sound better than the original drivers. The only slight complication is the original drivers use one 2.8mm and one 4.8mm spade terminal, so you need to change one of the connectors. These have given my old monitors (now my 'kitchen speakers') a whole new lease of life. Next step is to replace the rubber surrounds with a grille.
There is a detailed review of these drivers over on youtube: https://www.youtube.com/watch?v=NCb-rzCSK2s
Great service from Willys. They were dispatched straight away and arrived next day, very well packed.
I recently installed the Linn Keilidh active Tweeter Upgrade Kits from Willys Hifi. It works great! It took
1 month to get here snd had to pay an additional 90 euros in taxes and customs fees but it was well worth it!
The foam grill covers of my Mission 770s crumbled into dust many years ago. Only recently was I able to find what I thought would be a suitable replacement. Everything about the process went smoothly. The foam cut easily, looks good and, to my ears , is audibly transparent.
well packed, fast delivery, simple procedure
Finally got my electricity back today after the storm on Friday. Initially I was a bit apprehensive, as I had no experience in electronics. As I followed the colour coded looms, it got easier and more straightforward. Guess what! My Mission 753s sound better than they ever did in 1998 when I bought them brand new. New crossovers also brought one of my tweeters back to life (was dead for ten years) What a quality upgrade, worth every single penny. Willy and Caroline, you guys are legends.