All systems go - we are extremely busy at the moment
All systems go - we are extremely busy at the moment
DRIVE UNITS BY MANUFACTURER:
BC25SC08-04
This high efficiency tweeter features a 4 ohm 25 mm voice coil, high energy NdFeB Neodymium magnet assembly, a damped textile dome and ferrofluid in the magnetic gap for enhanced cooling of the voice coil - further cooling is achieved via a heatsink bonded to the magnet. The BC25SC08-04 has a compact horn loaded faceplate (70mm diameter) with recessed mounting holes, and comes complete with a foam sealing gasket to reduce vibration. The upper frequency range extension is very good with a commendable off-axis response.
A full datasheet can be downloaded from the bottom of this page.
Resonant frequency (fs) | 1663 Hz | Nominal impedance (Zn) | 4 Ω |
Effective diaphragm diameter | 25 mm | DC resistance (Re) | 2.79Ω |
Ferrofluid ? Y/N | Yes | RMS power handling | 100 W |
Recommended crossover | 2.5 kHz 12dB | Faceplate diameter | 70mm |
Sensitivity (2.83V/1m) | 94.9 dB | Cutout hole diameter | 44mm |
Peerless by Tymphany
Friendly technical support
40+ years in the trade
UK family run business
Excellent customer service
Quick dispatch
Replaced faulty Studio 0.5 drivers with these. Had a wobble about the fit so called to confirm details and had superb advice. Recommend both the drivers and Willy's!
I've been repairing a set of vintage speakers (Rogers JR149's) and honestly, I wouldn't have been able to do it without components and parts from Willy's Hi-fi! Thanks for the help and advice as well!
Quick shipping and high quality cloth. Very easy to work with and sticks well with contact adhesive. Very pleased with the final look!
Thanks to Will for advising on a replacement for these classic Arcam speakers from the early 90s. Good value and quick shipping. This was a small restoration project on this sealed box design - these now sound punchy, crisp and clear and really fill the room. Tweeters seem to still be breaking in as the detail and imaging just keeps getting better! Looking forward to coming back for parts for the next project!
I needed to renew the foam fabric around my JR149 loudspeakers. Age and UV light had caused them to start disintegrating - not helped when one of our cats decided to assist with her own paws!!
Googled and up came Willy's details. I confirmed that I needed two of the "large" sheets and paid by Paypal. Order promptly dispatched and JR149s cosmetically restored!