All systems go !
All systems go !
DRIVE UNITS BY MANUFACTURER:
DATS V3
Categories: Design Tools
The Dayton Audio DATS V3 is a unique PC based multipurpose test system for loudspeaker drive unit analysis. The comprehensive test software can accurately measure and test most moving coil speaker drive units, this is very useful for unknown drivers or those that have no published specifications.
Tests include: impedance response; buzz and rub test; calculate Thiel / Small parameters and measurement L/C/R values of components. Very easy to use - please see the downloadable datasheets for a full description.
DATS V3 module, test lead set, USB cable.
A link to the manufacturers product software update page can be found HERE.
Very pleased with this on initial testing runs, the driver parameter calculation is extremely handy and the comparison features to give pass/fail on drivers is performing much better than expected. Recommend for all loudspeaker design and service engineers!
Thanks for the review Jim !
Will & Caroline
UK prompt delivery. Excellent service.
Thanks for the review !
Will & Caroline
Prompt delivery. Item as described.
Thanks for the review !
Will & Caroline
Friendly technical support
40+ years in the trade
UK family run business
Excellent customer service
Quick dispatch
Swapped out the 30 yr old AlCap capacitors for the Audyn Q4 on Wills recommendation (along with a ferrofluid change). What a difference, added so much more definition and clarity. Very impressed. Audyns are a fair bit bigger size wise but fitted easily enough on the board and the access aperture on the TDL Studio 1's.
Excellent driver and superb service and advice from Willy's hi-fi. Would certainly recommend and I will definitely be using again. Super fast delivery and great prices
They offer great advice genuinely helpful and knowledgeable.
Excellent service.
Very happy with this replacement part, especially once id fitted it correctly!! Sounds great so know where to go when the other one fails. 👍
Just as expected. Works perfectly as a subwoofer @400Hz in a mono bi-amped active internet radio set up in my study. Thanks!
Bought a pair of these to replace the failing drivers in my 20 year old Alesis M1 Active Mk2s. They are physically a near perfect match for the cabinets and are a good match electrically for the amplifier, but sound better than the original drivers. The only slight complication is the original drivers use one 2.8mm and one 4.8mm spade terminal, so you need to change one of the connectors. These have given my old monitors (now my 'kitchen speakers') a whole new lease of life. Next step is to replace the rubber surrounds with a grille.
There is a detailed review of these drivers over on youtube: https://www.youtube.com/watch?v=NCb-rzCSK2s
Great service from Willys. They were dispatched straight away and arrived next day, very well packed.