All systems go - we are extremely busy at the moment
All systems go - we are extremely busy at the moment
DRIVE UNITS BY MANUFACTURER:
Fountek NeoX2.0-B
Categories: Fountek Drive Units - All Ribbon Tweeters
UK STOCK ITEM
The Fountek NeoX2.0 features Fountek's third generation ribbon tweeter technology. This medium sized design incorporates a larger surface area ribbon mounted in an aperiodic shallow horn resulting in an improved low end response / wider useable range with higher power handling than its predecessors. The 12x60mm ribbon is made from an ultra light (27mg) multilayer aluminium sandwich with a cross section of 0.015mm (approx 0.6 thou). Efficiency is quite high at 94dB.
The end tensioning clamps form a substantial heatsink for the low impedance ribbon and an impedance matching transformer is built into the back of the housing.
We recommend a minimum crossover frequency of 2.3kHz / 18db octave.
Frequency range | 1200Hz-40kHz | Nominal impedance (Zn) | 8 Ω |
Ribbon dimensions | 12x60mm | DC resistance (Ribbon) | 0.02 Ω |
Effective area (squared) | 720mm | RMS power handling | 25 W |
Crossover frequency | 2.3kHz/18db | Peak power | 43W |
Sensitivity (2.83V/1m) | 94dB | Faceplate (rectangular) | 113x69.5mm |
Friendly technical support
40+ years in the trade
UK family run business
Excellent customer service
Quick dispatch
Replaced faulty Studio 0.5 drivers with these. Had a wobble about the fit so called to confirm details and had superb advice. Recommend both the drivers and Willy's!
I've been repairing a set of vintage speakers (Rogers JR149's) and honestly, I wouldn't have been able to do it without components and parts from Willy's Hi-fi! Thanks for the help and advice as well!
Quick shipping and high quality cloth. Very easy to work with and sticks well with contact adhesive. Very pleased with the final look!
Thanks to Will for advising on a replacement for these classic Arcam speakers from the early 90s. Good value and quick shipping. This was a small restoration project on this sealed box design - these now sound punchy, crisp and clear and really fill the room. Tweeters seem to still be breaking in as the detail and imaging just keeps getting better! Looking forward to coming back for parts for the next project!
I needed to renew the foam fabric around my JR149 loudspeakers. Age and UV light had caused them to start disintegrating - not helped when one of our cats decided to assist with her own paws!!
Googled and up came Willy's details. I confirmed that I needed two of the "large" sheets and paid by Paypal. Order promptly dispatched and JR149s cosmetically restored!