All systems go ! miniDSP UMIK-1 back in UK stock.
All systems go ! miniDSP UMIK-1 back in UK stock.
DRIVE UNITS BY MANUFACTURER:
DT-25N
IN UK STOCK
The DT25N features a 25mm pure silk soft dome (with optimized geometry) mounted on a horn loaded face plate - this yields a particularly linear reproduction, even at lower frequencies whilst still offering a relatively high efficiency of 95dB.
The high power Neodymium magnet assembly is self shielding with very low magnetic dispersion. Neodymium magnets are usually found on much more expensive units, so there is great value here.
Especially suitable for building compact loudspeaker systems, but also for use in much larger designs & D'Appolito arrangements.
Resonant frequency (fs) | 1600 Hz | Nominal impedance (Zn) | 8 Ω |
Effective diaphragm diameter | 20mm | DC resistance (Re) | 5.7 Ω |
Ferrofluid ? Y/N | No | RMS power handling | 80 W |
Recommended crossover | 2.5kHz/12dB | Faceplate diameter | 66 mm |
Sensitivity (2.83V/1m) | 95 dB | Cutout hole diameter | 46 mm |
Friendly technical support
40+ years in the trade
UK family run business
Excellent customer service
Quick dispatch
Bought a pair of these to replace the failing drivers in my 20 year old Alesis M1 Active Mk2s. They are physically a near perfect match for the cabinets and are a good match electrically for the amplifier, but sound better than the original drivers. The only slight complication is the original drivers use one 2.8mm and one 4.8mm spade terminal, so you need to change one of the connectors. These have given my old monitors (now my 'kitchen speakers') a whole new lease of life. Next step is to replace the rubber surrounds with a grille.
There is a detailed review of these drivers over on youtube: https://www.youtube.com/watch?v=NCb-rzCSK2s
Great service from Willys. They were dispatched straight away and arrived next day, very well packed.
I recently installed the Linn Keilidh active Tweeter Upgrade Kits from Willys Hifi. It works great! It took
1 month to get here snd had to pay an additional 90 euros in taxes and customs fees but it was well worth it!
The foam grill covers of my Mission 770s crumbled into dust many years ago. Only recently was I able to find what I thought would be a suitable replacement. Everything about the process went smoothly. The foam cut easily, looks good and, to my ears , is audibly transparent.
well packed, fast delivery, simple procedure
Finally got my electricity back today after the storm on Friday. Initially I was a bit apprehensive, as I had no experience in electronics. As I followed the colour coded looms, it got easier and more straightforward. Guess what! My Mission 753s sound better than they ever did in 1998 when I bought them brand new. New crossovers also brought one of my tweeters back to life (was dead for ten years) What a quality upgrade, worth every single penny. Willy and Caroline, you guys are legends.