DUTY PAID SHIPPING TO THE USA NOW AVAILABLE !!
DUTY PAID SHIPPING TO THE USA NOW AVAILABLE !!
DRIVE UNITS BY MANUFACTURER:
D26NC56-06
UK STOCK ITEM
ATC SCM12, SCM7a (early), SCM35, SCM25a, Hafler TRM6, Royd RR2, Royd RR3, Miller & Kreisel (various models). This is the long awaited replacement for the highly respected D26NC15-06 and D26NC55-06.
Perfect replacement, no modifications required. A downloadable datasheet is available from this page.
We recommend changing in pairs to maintain channel balance as older versions often have reduced output due to ferrofluid thickening.
Resonant frequency (fs) | 1625 Hz | Nominal impedance (Zn) | 6 Ω |
Effective diaphragm diameter | 26 mm | DC resistance (Re) | 4.68 Ω |
Ferrofluid ? Y/N | Yes | RMS power handling | 100 W |
Recommended crossover | 2.5 kHz 18dB | Faceplate diameter (cropped profile) | 70 mm |
Sensitivity (2.83V/1m) | 89.3 dB | Cutout hole diameter | 45 mm |
Peerless by Tymphany
Ordered two of these tweeters on Friday afternoon NZ time, amazingly they had arrived in Auckland the following Tuesday morning, arrived in my home town of Christchurch couple of days later and were promptly installed. Seem to be doing and sound as they should, thank you for your service!
Thanks for the review Rowan, glad they arrived safely.
If that doesn't get the girls dancing nothing will !
Will & Caroline
Fast delivery
Thanks for the review Sunny !
Will & Caroline
The tweeters arrived promptly and packaged really well. For size and fitting they are a perfect replacement for the 55-06 units. As regard to SQ, at the moment they sound a little bright and forward; I’m hoping this will reduce a little as they run in. Maybe my ear is just used to the old OEM tweeters that were obviously quite a few db down after 20 years. Very much looking forward to hearing how they settle over the coming weeks. Thank you.
Thanks for the review Darren !
Will & Caroline
Very good service. Fast and relaible.
Thanks for the review Sergey !
Will & Caroline
Great replacement for tweeters in Royd RR2 which had very dried out Ferrofluid and were down a fair few dB. Only minor easy mods required to cutout in speaker undertaken with a file. Well worth it, speakers sounding lovely.
Thankyou for your review !
Will & Caroline
Friendly technical support
40+ years in the trade
UK family run business
Excellent customer service
Quick dispatch
I've had my Mission 734s for about 30 years and for the last five or so the bass units have been falling to pieces. I was about to take the speakers to the tip, but didn't have the heart knowing how capable these used to be. I did a little internet research and these Monacor replacements appeared to do the job. Next day delivery from Willys was impressive, as was the killer sound once the replacements were fitted (which was a simple job). I'd forgotten how these speakers make the windows rattle. Very happy customer!
Excellent service from Willys-Hifi. Caroline was very helpful and patient when answering my queries. Please be aware that some soldering is required when connecting the tweeters. Something I haven't done since I was at school over 40 years ago! They do sound good though, listening to Smoke on the Water as I write , wow 😆
thx you so much for helping me geting the twiters for my speakers i hope all good for your bisnis in the futur and that it will never close i recemed you to the norwigen hifikluben its a store in norway for parts and hifi so you brobely will get order from ther now thx agine for the parts btw you need to put a bit of fome on the back side of the speakers for it to mount in the b&w cmd1 se to make them fit i will leave som pictur of the istalsjon
I always knew that Linn should never have stopped using Hiquphon tweeters. What I don't know is why it's taken me thirty years to fit a pair in my old Kabers. It's often hard to describe sonic character ....but to pinch Linn's old line from back in the day ...they're Simply Better.(even straight out the box with soldering iron still warm)
As my Kabers are passive,I had been a little concerned that the the 8 ohm nominal impedence of the OW1 would mess with the crossover slope. I needn't have worried....if its shifted the crossover point its much for the better.
Warm thanks also to Will and Caroline for a service in keeping with the outstanding quality of the Hiquphon product.
Alan
Been looking for a supplier of replacement drivers for some years.
Willy's HiFi had just the parts at a good price and they arrived in a couple of days.