All systems go !
All systems go !
DRIVE UNITS BY MANUFACTURER:
SB20PFCR30-8

UK STOCK ITEM
The SB Acoustics SB20PFCR30-8 is an 8 inch 8 ohm woofer bass speaker featuring a paper / pulp cone, a vented reinforced plastic chassis and an optimised motor system. A relatively low priced woofer that gives an excellent cost to performance ratio.
Also available in 4 ohms: SB20PFCR30-4.
| Resonant frequency (fs) | 34 Hz | Nominal impedance (Zn) | 8 Ω |
| Mechanical Q factor (Qms) | 2.66 |
DC resistance (Re) | 5.6 Ω |
| Electrical Q factor (Qes) | 0.43 |
Max power handling | 50 W |
| Total Q factor (Qts) | 0.37 |
Sensitivity (2.83V/1m) |
90.5dB |
| Equivalent volume (Vas) | 66.2L | Chassis diameter |
218mm |
Contacted Willy regarding replacing main speaker in my mission 770
Although exact replacement not made anymore I was guided to a superb alternative that fitted without modification and works really well
Reasonably priced too
Very good service and quick supply
Thanks
Thanks for the review Chris !
Will & Caroline
Excellent replacement speakers along with great advice and service.
Thanks for the review Paul!
Will & Caroline
Friendly technical support
40+ years in the trade
UK family run business
Excellent customer service
Quick dispatch
Speaker grill foam for Harbeths
I was concerned that they may not look like the original binding posts on my Rogers LS6 speakers but they are a perfect match. Quite solid. Shipping was quick and easy. I recommend the product and Willys Hifi.
Greetings from Quebec, Canada.
Product as described, easy to cut & fit.
On reflection having now fitted the foam, I wish it was 15mm to 18mm or even 20mm thick. This is not a complaint. For a small speaker under 30cm high it’s perfect. For a larger speaker I feel a thicker sponge would hold its structure more pleasingly, its aesthetics, but important for the finished look.
I’ve been building my own home cinema as a complete DIY project and reached the stage where I needed some decent acoustic foam for my speaker panels (also DIY!) so I picked up 3 large sheets from here. They were sent quickly, packed well and moreover, are of excellent quality. With them being folded into the shipping box they were slightly creased but after leaving them out overnight on a flat surface, the creases fell out completely. They’re now in place and doing their job brilliantly. Cheers Willys Hifi!
The crossover was constructed well, I just need to figure out the best way to attach it to my Kef Concertos as they are bigger than the ones supplied by Kef that are mounted on the front of the baffle board.
