All systems go !
All systems go !
DRIVE UNITS BY MANUFACTURER:
R3004/602005
Based on the Illuminator R3004/602000, this 27mm ring radiator tweeter is specially upgraded and response optimised for in car use. Features include a red alloy phase correction plug, a high power SD-2 Symmetrical Drive Neodymium magnet system, protective multi-hex grille and a low profile aluminium body with a non resonant rear chamber - ideal for car doors or other confined mounting positions. Built from top quality component parts, this compact tweeter is rated at 130w maximum power and is fully comparable to the renowned full size Illuminator and Revelator tweeters.
All of the Automotive range of tweeters feature Neodymium magnet assemblies, these are far more powerful than their traditional ferrite counterparts allowing for a range of compact drive units that offer a level of performance belying their size.
Resonant frequency (fs) | 630 Hz | Nominal impedance (Zn) | 4 Ω |
Effective diaphragm diameter | 27 mm | DC resistance (Re) | 3.8 Ω |
Ferrofluid ? Y/N | No | Max. power handling | 130W |
Recommended crossover | 2.5 kHz 18dB | Faceplate diameter | 62mm |
Sensitivity (2.83V/1m) | 90 dB | Cutout hole diameter | 50 mm |
Friendly technical support
40+ years in the trade
UK family run business
Excellent customer service
Quick dispatch
Replaced faulty Studio 0.5 drivers with these. Had a wobble about the fit so called to confirm details and had superb advice. Recommend both the drivers and Willy's!
I've been repairing a set of vintage speakers (Rogers JR149's) and honestly, I wouldn't have been able to do it without components and parts from Willy's Hi-fi! Thanks for the help and advice as well!
Quick shipping and high quality cloth. Very easy to work with and sticks well with contact adhesive. Very pleased with the final look!
Thanks to Will for advising on a replacement for these classic Arcam speakers from the early 90s. Good value and quick shipping. This was a small restoration project on this sealed box design - these now sound punchy, crisp and clear and really fill the room. Tweeters seem to still be breaking in as the detail and imaging just keeps getting better! Looking forward to coming back for parts for the next project!
I needed to renew the foam fabric around my JR149 loudspeakers. Age and UV light had caused them to start disintegrating - not helped when one of our cats decided to assist with her own paws!!
Googled and up came Willy's details. I confirmed that I needed two of the "large" sheets and paid by Paypal. Order promptly dispatched and JR149s cosmetically restored!