All systems go - we are extremely busy at the moment
All systems go - we are extremely busy at the moment
DRIVE UNITS BY MANUFACTURER:
Morel ET 338-104 Tweeter- Black
Categories: 0.75 - 2" (19-50mm) Dome Tweeters Morel Tweeters
104mm faceplate version.
PRICED AS A MATCHED PAIR.
The Morel Elite ET338-104 is a modern updated version of the legendary MDT-33s. This innovative 28mm soft dome tweeter features a triple ferrite magnet system, a field replaceable Acuflex dome, large Hexatech aluminium voice coil and an aluminium rear chamber that is critically tuned and damped . A highly regarded tweeter capable of great transparency with a wide response of 1,800-20,000 Hz. Substantial power rating of 200w nominal, 1000w peak.
Available in Black or Silver - select from the drop down list above.
A full datasheet can be downloaded from the bottom of this page.
Resonant frequency (fs) | 700 Hz | Nominal impedance (Zn) | 8 Ω |
Effective diaphragm diameter | 28mm | DC resistance (Re) | 5.2 Ω |
Ferrofluid ? Y/N | Yes | RMS power handling | 200W |
Recommended crossover | 2.5khz | Faceplate diameter | 104 mm |
Sensitivity (2.83V/1m) | 92.5 dB | Cutout hole diameter | 76 mm |
ET338-104
Friendly technical support
40+ years in the trade
UK family run business
Excellent customer service
Quick dispatch
Replaced faulty Studio 0.5 drivers with these. Had a wobble about the fit so called to confirm details and had superb advice. Recommend both the drivers and Willy's!
I've been repairing a set of vintage speakers (Rogers JR149's) and honestly, I wouldn't have been able to do it without components and parts from Willy's Hi-fi! Thanks for the help and advice as well!
Quick shipping and high quality cloth. Very easy to work with and sticks well with contact adhesive. Very pleased with the final look!
Thanks to Will for advising on a replacement for these classic Arcam speakers from the early 90s. Good value and quick shipping. This was a small restoration project on this sealed box design - these now sound punchy, crisp and clear and really fill the room. Tweeters seem to still be breaking in as the detail and imaging just keeps getting better! Looking forward to coming back for parts for the next project!
I needed to renew the foam fabric around my JR149 loudspeakers. Age and UV light had caused them to start disintegrating - not helped when one of our cats decided to assist with her own paws!!
Googled and up came Willy's details. I confirmed that I needed two of the "large" sheets and paid by Paypal. Order promptly dispatched and JR149s cosmetically restored!