All systems go !
All systems go !
DRIVE UNITS BY MANUFACTURER:
M-Resist MR5-120
Categories: Crossover Resistors - 5 Watt Mundorf M-Resist
Non inductive MOX (metal oxide) resistor with excellent sonic performance - ideal for loudspeaker crossover networks of the highest quality. Close tolerance, 2% of rated value.
Length: 24mm
Diameter: 8mm
Leadout: 35mm per side, 0.8mm wire.
Part No: MR5-120
Datasheet:
Full range from 0.1 to 56 Ohms in stock.
fine, the resistors matched their values as requested, matched pairs, will I use Willy's hi fi again? yes, no problem
Thanks for the review Col !
Will & Caroline
1990 Linn Index II LS120 Crossover and wiring upgrade.
Truly Outstanding performance upgrade flying in the face of conventional wisdom.
The resistor value is increased from 2.2 to 2.7 and is an official Linn Service 'performance' upgrade.
HF
C1 3.9uF Jantzen Superior z-cap
C3 1uF Mundorf MCap EVO Aluminium Oil
R1 Mundorf M-Resist 5W 2.7 Ohm 2% MOX
LF
C2 5.1 uF split
3.3 uF Mundorf MCap EVO Aluminium Oil
1.8 uF Jantzen Superior z-cap
Carded lambswool replacing original poly wadding. Increased weight replacing 132g ea. for 215g ea. This was weighed out in stages and determined by sonic performance.
Small amount approx 15cm sq of Bitumen foam panel placed in two pieces in base of cab. (leftovers from another project.)
Jantzen solid core speaker cable AWG 17/ 1.15mm stripped of PVC outer sheath to leave only high performance PE insulation. Doubled and twisted Star-Quad. 2.3mm
x2 400mm lengths ea.
Replace binding post steel nuts and locking nuts on back of PCB with copper nuts x8 and locktight. (steel nuts in signal path???= Nuts)
Remove all Plastic front panels and rubber securing bungs. Seal air holes in front baffle sockets. (Holes!)
Total cost £190.00.
Worth every penny! The cost of replicating this level of performance will be many, MANY times this amount. This understanding determined my budget. Happy to spend £200 upgrading on a gamble for the knowledge and experience. The results are very serious for this money.
I purchased these new in 1990 and paid £220.00. They were never highly regarded but always delivered a satisfying sound I never bored of even though Bass is not a strong point in this sealed design. Proximity to rear wall is everything here.
No previous experience with crossover upgrades. Never built a PCB. Very limited knowledge of electronics A beginner !
Every sonic element is vastly improved. Detail everywhere, Soundstage opened up. Depth, Clarity, Definition, Truly remarkable the level of performance these 'nothing special' loudspeakers are now delivering. They are being driven by Oppo 105 upgraded, John Sampson upgraded Musical Fidelity A1. All solid core power/interconnect/speaker cables.
This project was only completed 'confidently' with the kind, generous help and insights from Willys HIFI who supplied all the excellent Mundorf components.
Cannot thank Will enough for his patience and knowledge. My lack of knowledge and understanding was never a barrier to success only because Will was so helpful, enthusiastic and interested in my enquiries. Will cautioned against my extravagant choice of caps. The results could not be predicted and so a more responsible and cost efficient choice was Will's sagely recommendation. Trustworthy, Knowledgeable and Approachable. How refreshing. My choice was a gamble to push the limits and the budget, the results are beyond my hopes and expectations.
Highly commendable service and support. Outstanding in the Audio/HiFi marketplace.
Thank you Will.
John.
Thanks for the comprehensive review John !
Will & Caroline
Friendly technical support
40+ years in the trade
UK family run business
Excellent customer service
Quick dispatch
I've needed something like this for years, fantastic product and a lovely company to deal with. Won't be my last purchase from them
It was a nice experience to send the old filters to the UK (from the Netherlands) and get them surprisingly fast back (taking the overseas shipment into account). At first I did it wrong since I also replaced the drivers that could also be connected in a 4/6 Ohm (double coil). But after correcting and calibrating my receiver the speakers sounded great.
Thanks!
Used in a DIY LS3/5a project, with Morel CAT 298 tweeters and custom crossovers using ClarityCap CSAs. Super pleased with these woofers! I think they synergize well with the “live” thin-wall LS3/5a cabinets. The sound is neither bloated, nor thin, just revealing, spacious, and with very lifelike tone. I’m so happy with the results of this project and had a great buying experience with Willy’s. Thank you!!
I used this in custom LS3/5a speaker enclosures along with Monacor SPH-135AD woofers and custom crossovers using ClarityCap CSAs. The tweeters have a very pure sound, revealing microdetails and having a naturally smooth, response. The sound is never peaky or rough. I’m very happy with my purchase and with the service from Willys. Would buy from again for a future project!
I bought a pair of Acoustic Research AR28LS speakers back in 1985 for £129 ! After about 15 years the foam suspension had started to perish and completely failed in 2006 following a rather loud teenage party. I was never happy with the Eminence Beta-8A replacements bought from a local shop at the time, as the bass resonance was far too high. Finally decided to replace them with Monacor SPH-8M and the speakers now sound as good as new. Arrived quickly and no problems fitting. Many thanks.