All systems go !
All systems go !
DRIVE UNITS BY MANUFACTURER:
R3004/602005

Based on the Illuminator R3004/602000, this 27mm ring radiator tweeter is specially upgraded and response optimised for in car use. Features include a red alloy phase correction plug, a high power SD-2 Symmetrical Drive Neodymium magnet system, protective multi-hex grille and a low profile aluminium body with a non resonant rear chamber - ideal for car doors or other confined mounting positions. Built from top quality component parts, this compact tweeter is rated at 130w maximum power and is fully comparable to the renowned full size Illuminator and Revelator tweeters.
All of the Automotive range of tweeters feature Neodymium magnet assemblies, these are far more powerful than their traditional ferrite counterparts allowing for a range of compact drive units that offer a level of performance belying their size.
| Resonant frequency (fs) | 630 Hz | Nominal impedance (Zn) | 4 Ω |
| Effective diaphragm diameter | 27 mm | DC resistance (Re) | 3.8 Ω |
| Ferrofluid ? Y/N | No | Max. power handling | 130W |
| Recommended crossover | 2.5 kHz 18dB | Faceplate diameter | 62mm |
| Sensitivity (2.83V/1m) | 90 dB | Cutout hole diameter | 50 mm |
Friendly technical support
40+ years in the trade
UK family run business
Excellent customer service
Quick dispatch
I’ve been building my own home cinema as a complete DIY project and reached the stage where I needed some decent acoustic foam for my speaker panels (also DIY!) so I picked up 3 large sheets from here. They were sent quickly, packed well and moreover, are of excellent quality. With them being folded into the shipping box they were slightly creased but after leaving them out overnight on a flat surface, the creases fell out completely. They’re now in place and doing their job brilliantly. Cheers Willys Hifi!
The crossover was constructed well, I just need to figure out the best way to attach it to my Kef Concertos as they are bigger than the ones supplied by Kef that are mounted on the front of the baffle board.
Very nice deep bass look amazing with my custom made speaker
Great speedy delivery and very easy to fit. The plastic in my drivers had perished and they had suffered one too many parties! No need to make any adjustments (someone above did suggest that). I just screwed them in and the foam compressed into place. Before and after below (before I changed speaker number 2). Thank you!
Thanks you very much for the kit. I found back my kelidh after nearly 27 years. The filter were really dead and one tweeter damaged. Very happy to decide to repair/ upgrade rather than change. I found back tone and stereo stage like in the old days probably even better.
I didn't know soldering material was so important thanks for providing some.
Quite easy to recap filter and change tweeters.
Also wanted to thank you for this little note hand writen in French just for me. Very nice attention to see.
Next step is the next question do I change first the drivers with the monacor as I ve lost dust caps but they still work properly or do I change my old arcam alpha 8. Is there really something to gain moving to an newer arcam sa10 or Radia a5? Are newer amplifier much better than the old days one?
