All systems go - we ship to the USA !
All systems go - we ship to the USA !
DRIVE UNITS BY MANUFACTURER:
Morel CAT 328-110
Categories: 0.75 - 2" (19-50mm) Dome Tweeters Morel Tweeters
110mm faceplate version
UK STOCK ITEM
The Morel CAT 328-110 is a modern updated version of the legendary MDT-32S with a 110mm faceplate. Featuring a field replaceable 28mm Acuflex textile dome, a large ferrofluid cooled Hexatech aluminium voice coil, a vented ferrite magnet system and a critically tuned / damped rear chamber, this tweeter is remarkably transparent and is a very good performer at this price point. Recommended frequency use: 2000-20,000 Hz. Substantial power rating of 200w nominal, 1000w peak.
A full datasheet can be downloaded from the bottom of this page.
Resonant frequency (fs) | 650 Hz | Nominal impedance (Zn) | 8 Ω |
Effective diaphragm diameter | 28mm | DC resistance (Re) | 5.2 Ω |
Ferrofluid ? Y/N | Yes | RMS power handling | 200W |
Recommended crossover | 2khz | Faceplate diameter | 110mm |
Sensitivity (2.83V/1m) | 90 dB | Cutout hole diameter | 72 mm |
CAT328
Absolutely first class service again brilliant advice as i always get from Will. Bought some Morel CAT 328-110 Tweeters and they sound sublime and the detail is incredible. Not harsh at all and very airy performs well beyond its price point im so glad Will advised me on this as the perfomance is fantastic. In fact Will has saved me thousands as replacing drivers has saved me investing in new speakers first class service once again.
Very happy customer thansk again.
Thanks for the review Gary !
Will & Caroline
Friendly technical support
40+ years in the trade
UK family run business
Excellent customer service
Quick dispatch
Excellent upgrade, works perfectly with the speakers it's just soldier and play, they takeaway the over intensity of the original tweeters.
I've had my Mission 734s for about 30 years and for the last five or so the bass units have been falling to pieces. I was about to take the speakers to the tip, but didn't have the heart knowing how capable these used to be. I did a little internet research and these Monacor replacements appeared to do the job. Next day delivery from Willys was impressive, as was the killer sound once the replacements were fitted (which was a simple job). I'd forgotten how these speakers make the windows rattle. Very happy customer!
Excellent service from Willys-Hifi. Caroline was very helpful and patient when answering my queries. Please be aware that some soldering is required when connecting the tweeters. Something I haven't done since I was at school over 40 years ago! They do sound good though, listening to Smoke on the Water as I write , wow 😆
thx you so much for helping me geting the twiters for my speakers i hope all good for your bisnis in the futur and that it will never close i recemed you to the norwigen hifikluben its a store in norway for parts and hifi so you brobely will get order from ther now thx agine for the parts btw you need to put a bit of fome on the back side of the speakers for it to mount in the b&w cmd1 se to make them fit i will leave som pictur of the istalsjon
I always knew that Linn should never have stopped using Hiquphon tweeters. What I don't know is why it's taken me thirty years to fit a pair in my old Kabers. It's often hard to describe sonic character ....but to pinch Linn's old line from back in the day ...they're Simply Better.(even straight out the box with soldering iron still warm)
As my Kabers are passive,I had been a little concerned that the the 8 ohm nominal impedence of the OW1 would mess with the crossover slope. I needn't have worried....if its shifted the crossover point its much for the better.
Warm thanks also to Will and Caroline for a service in keeping with the outstanding quality of the Hiquphon product.
Alan