New workshop now open - all systems go!
New workshop now open - all systems go!
DRIVE UNITS BY MANUFACTURER:
Morel EW 428
The Morel EW 428 is a 4 inch 8 ohm Woofer from the Elite range featuring the Morel Uniflow rigid steel chassis, a powerful Neodymium magnet system, 2.1 inch Hexatech aluminium voice coil and a shallow DPC (damped composite polymer) cone. The rated power is high at 150w nominal, 800w peak. This driver features a large vent in the pole piece for minimal compression when driven hard and has a high maximum linear excursion of 9mm.
Resonant frequency (fs) | 62 Hz | Nominal impedance (Zn) | 8 Ω |
Mechanical Q factor (Qms) | 2.36 | DC resistance (Re) | 6.3 Ω |
Electrical Q factor (Qes) | 0.41 | RMS power handling | 150W |
Total Q factor (Qts) | 0.35 | Sensitivity (2.83V/1m) | 87 dB |
Equivalent volume (Vas) | 4.7 L | Chassis diameter | 118.5 mm |
EW428
Friendly technical support
40+ years in the trade
UK family run business
Excellent customer service
Quick dispatch
Bought a pair of these to replace the failing drivers in my 20 year old Alesis M1 Active Mk2s. They are physically a near perfect match for the cabinets and are a good match electrically for the amplifier, but sound better than the original drivers. The only slight complication is the original drivers use one 2.8mm and one 4.8mm spade terminal, so you need to change one of the connectors. These have given my old monitors (now my 'kitchen speakers') a whole new lease of life. Next step is to replace the rubber surrounds with a grille.
There is a detailed review of these drivers over on youtube: https://www.youtube.com/watch?v=NCb-rzCSK2s
Great service from Willys. They were dispatched straight away and arrived next day, very well packed.
I recently installed the Linn Keilidh active Tweeter Upgrade Kits from Willys Hifi. It works great! It took
1 month to get here snd had to pay an additional 90 euros in taxes and customs fees but it was well worth it!
The foam grill covers of my Mission 770s crumbled into dust many years ago. Only recently was I able to find what I thought would be a suitable replacement. Everything about the process went smoothly. The foam cut easily, looks good and, to my ears , is audibly transparent.
well packed, fast delivery, simple procedure
Finally got my electricity back today after the storm on Friday. Initially I was a bit apprehensive, as I had no experience in electronics. As I followed the colour coded looms, it got easier and more straightforward. Guess what! My Mission 753s sound better than they ever did in 1998 when I bought them brand new. New crossovers also brought one of my tweeters back to life (was dead for ten years) What a quality upgrade, worth every single penny. Willy and Caroline, you guys are legends.