All systems operational. Multiple currency checkout available soon !

All systems operational. Multiple currency checkout available soon !



SB Acoustics SB23CACS45-4 Ceramic Woofer

SB Acoustics logo

Shallow Profile Ceramic Woofer:

The SB Acoustics SB23CACS45-4 is a 8 inch 4 ohm woofer / bass speaker featuring a geometrically reinforced ceramic cone, a low distortion motor system and a vented cast aluminium chassis. The ceramic layer is bonded to an aluminium substrate, this combination of materials results in an excellent stiffness to damping ratio. A very low distortion design for applications with restricted rear depth.

Also available in 8 ohms: SB23CACS45-8.

Key Features:

  • Soft low damping rubber surround for improved transient response.
  • Geometrically reinforced ceramic cone for improved break-up control.
  • Shorting ring in motor system for reduced distortion.
  • Vented pole piece for reduced compression.
  • Vented cast aluminium chassis for optimum strength and low compression.
  • Non-conducting fibre glass voice coil former for minimum damping.
  • CCAW voice coil for reduced moving mass.
  • Long life silver lead wires.
  • Shallow design.

Basic parameters:

Resonant frequency (fs) 23 Hz Nominal impedance (Zn) 4 Ω
Mechanical  Q factor (Qms) 6.0
DC resistance (Re) 3.3 Ω
Electrical Q factor (Qes) 0.35
Max power handling 60 W
Total Q factor (Qts) 0.33
Sensitivity (2.83V/1m)
Equivalent volume (Vas) 95L Chassis diameter

Here's the full datasheet:

.pdf link