Search: 23 results found for "*heybrook*"

23 results

Heybrook Speaker Logo Badge GENUINE

from £10.00

Genuine Heybrook loudspeaker badge. These are new surplus stock from when the factory closed; as fitted to the very last classic production models: Sextet, Octet, Heylios, Heylette and others. These plastic badges measure 50 x 15mm long with the hot...

Heybrook HB1, JPW P1, AP2, AP3 and Snell type K Bass Units

February 16, 2017

Vifa M21WG-09-08 Woofer This classic drive unit was conceived by Vifa in the mid to late 80s specifically for inclusion within high performance sealed baffle designs of moderate size (20-40 litres), with a final rolloff of 12dB / octave thus offering good bass extension and immediacy (fashionably now called PRAT - Pace, Rhythm, Attack, Timing) - without the 4th order / 24 dB octave rolloff and corresponding poorer transient response of ported enclosures. Selected by legendary speaker designer...

Speaker Grille Foam Sheet

from £5.98

Acoustically transparent speaker grille foam sheet. Open cell acoustic foam sheets specifically designed for loudspeaker use. A large number of commercial loudspeaker models from the 1970/80s came with foam grilles, most of these have crumbled away now due to the...

HiFi Crossover Inductor 1.0mH Iron Core

£1.71

1.0mH Inductor - Iron Dust Bobbin. 0.75mm enamelled OFC wire ~ fine for upto 100 watt systems. The bobbin size is approx 20mm high x 24mm diameter, core 12mm. Simple to fix to a crossover panel with hot melt glue...

HiFi Crossover Inductor 0.68mH Iron Core

£1.63

0.68mH Inductor - Iron Dust Bobbin. 0.75mm enamelled OFC wire ~ fine for upto 100 watt systems. The bobbin size is approx 20mm high x 24mm diameter, core 12mm. Simple to fix to a crossover panel with hot melt glue...

HiFi Crossover Inductor 1.25mH Iron Core

£1.90

1.25mH Inductor - Iron Dust Bobbin. 0.75mm enamelled OFC wire ~ fine for upto 100 watt systems. The bobbin size is approx 26mm high x 26mm diameter, core 12mm. Simple to fix to a crossover panel with hot melt glue...

Audax HD-3P tweeter replacement kit

January 19, 2017

The Audax HD-3P tweeter was a piece of exotic, visionary engineering from the 1990s. Fundamentally a piezo tweeter, it featured a gold spattered elliptical diaphragm formed onto a nitrogen filled balloon. Technically and sonically brilliant but fatally flawed due to gas loss and barometric pressure changes; many are now defunct with low / no output or exhibit the 'crinkle of doom'. This unique, state of the art tweeter was used in various high end loudspeakers including the World Audio De...

Vifa Peerless D19TD05-08 Tweeter - Celestion HF2000 replacement.

£26.40

Vifa / Peerless D19TD05-08. IN UK STOCK NOW ! UK / EU EXCLUSIVE. DIRECTLY REPLACES SEAS 19TFF1 / H0737-08 The D19TD-05-08 is possibly the most popular 19mm soft dome of all time. Found in a huge amount of respected and...

Vifa / Peerless D19TD-05-08

May 17, 2018

Vifa Peerless D19TD-05-08 in stock now !! UK / EU Exclusive from Willys Hifi Ltd. The D19TD-05-08 is possibly the most popular 19mm soft dome of all time. Found in a huge range of popular and award winning loudspeaker models from manufacturers such as Mission, Rogers, Heybrook, JPW, Monitor Audio and countless others, this relatively inexpensive tweeter is a very capable performer hence its long term popularity from the 1980s onwards. Available now as a new production item - click image to vi...

Speaker Name Badges - genuine replacement parts

August 27, 2015

We have a selection of genuine loudspeaker name badges. Rogers Badge. These are the later chunky type with the hot foiled silver logo, used on late LS3/5a and many others. TDL Badge. Used on the classic RTL1, RTL2, RTL3 and the later G20 and G30. Heybrook Badge. We have 2 versions of this badge, silver text on grey and gold text on black; as found on the classic models : Sextet, Octet, Heylios, Heylette and various others. Harbeth Badge. As used on the rare top value NRG range. These badges ...

Peerless OEM Drive units now listed.

July 16, 2015

Peerless OEM driver range Peerless Fabrikkerne A/S was founded in Denmark in 1926 and soon established itself as a respected speaker maker in the emerging audio markets. In 1978 after decades of manufacturing near Copenhagen, production was split between Denmark and a new state of the art OEM production facility in India. Peerless Fabrikkerne (India) is now the largest producer of OEM drive units and have been used extensively by various manufacturers including: Kef, Mission, JPW, Monitor ...

More New Old Stock Spares Parts Available

November 17, 2017

Connectors for various historic loudspeakers. We've been having a good sort out in the warehouse recently to make room for a large quantity of incoming products - truth be told, we've been putting this job off for a while as it's a major task, however every cloud has a silver lining: we've found various treasures tucked away and will be adding them to this website over the coming weeks. Here's a few for starters: Binding posts for Rogers LS3/5a and Spendor BC1. Banana sockets for Linn Kan. ...

Foam Speaker Grille Repairs

October 09, 2020

Acoustically transparent speaker grille foam sheet. We now stock open cell acoustic foam sheets specifically designed for loudspeaker use. A large number of commercial loudspeaker models from the 1970/80s came with foam grilles, most of these have crumbled away now due to the long term effects of UV light & general ageing. We sell 3 sizes: Small: 480 x 378mm Medium: 611 x 480mm Large: 780 x 420mm These new foam sheets are 10mm thick and can easily be cut to size. Ideal for rest...

All Audax drive units now listed

May 25, 2017

New old stock drive units from Audax. Audax were true innovators and released many cutting edge technologies never seen before such as the HDA (High Definition Aerogel) cone - a unique product based on acrylic polymer gel containing carbon and kevlar fibres in perfect molecular alignment. HDA was the product of extensive research for the perfect cone material that is both lightweight, rigid and displays high internal damping. Another breakthrough technology was the brilliant but sadly short...

Peerless D19TD-05-08 and D26NC-56-06 In UK Stock

May 06, 2022

Classic Vifa / Peerless tweeters back in UK stock! We have listened to your requests and now have high stock levels of the following classic tweeters: Peerless D26NC-56-06: Suits: ATC SCM12, SCM7a (early), SCM35, SCM25a, Hafler TRM6, Royd RR2, Royd RR3, Miller & Kreisel (various models). This is the long awaited replacement for the highly respected D26NC15-06 and D26NC55-06. Perfect replacement, no modifications required. Peerless D19TD-05-08: The D19TD-05-08 is possibly the most popula...

Vifa Classic Drive Units

February 28, 2020

Vifa classic drive units in stock now: A range of high performance drive units that were originally designed and manufactured in Denmark by the legendary Vifa company. These highly popular drive units were used in many successful 1980/90s commercial models before Vifa were absorbed into the far eastern Tymphany group. A new production of these drive units is now manufactured by Scanspeak in Denmark using the original Vifa tooling and procedures. High resolution images and full details ca...

Morel CAT 298-94 Tweeter

£78.40

94mm faceplate soft dome tweeter. Great upgrade for the TDL RTL series, Heybrook HB1, Mission 737R and many others requiring a 20/25mm dome tweeter with 94mm faceplate, such as the Vifa D20/D25 series. The Morel CAT 298 is a modern...

Vifa M21WG-09-08 Heybrook HB1, Snell Type K, JPW P1 / AP2 / AP3 Woofer

Sold Out

Vifa M21WG-09-08 Woofer. UK STOCK ITEM Direct replacement for: Heybrook HB1, JPW P1, JPW AP2, JPW AP3, Snell type K. This classic 8" bass unit is designed for sealed cabinets of between 20 - 40 litres. It features a very...

Heybrook Loudspeaker Gold Bus Bars

Sold Out

Heybrook Loudspeaker Gold Bus Bars. Genuine Heybrook spare part - top quality, made in the UK. Heavy gold plated brass bus bars to convert biwire rear panels to single cable operation. Fits all late 1980s -1990s models with BFA 4...

HiFi Crossover Inductor 1.5mH Iron Core

Sold Out

1.5mH Inductor - Iron Dust Bobbin. 0.75mm enamelled OFC wire ~ fine for upto 100 watt systems. The bobbin size is approx 26mm high x 26mm diameter, core 12mm. Simple to fix to a crossover panel with hot melt glue...

Vifa / Peerless TC18WG-09-08 6.5" Bass / Midrange

Sold Out

Classic new old stock drive unit. Used in many 1990s commercial designs including: Heybrook Heylo / Heystack / Heylios. Non resonant Polymer chassis, butyl rubber surround, treated multilayer pulp cone. Smooth, extended frequency response. Excellent replacement for many 6.5" drivers....

SEAS H519 (25TFFC) Tweeter

Sold Out

Used by Proac, Sonus Faber, Heybrook, Spendor. Widely regarded as one of the finest tweeters ever made, there is no longer any need to try and source a modern equivalent ~ you can now have the correct replacement tweeter. These...

Audio Electronics BMB180 6.5" Bass / Mid Speaker

Sold Out

Handbuilt in England, superbly engineered high end drive unit. Audio Electronics Ltd were a small English company that made various top quality bespoke bass speakers for Heybrook (Sextet), BMW cars, & the flagship JPW Ruby range. These drivers feature a...