All systems go !
All systems go !
DRIVE UNITS BY MANUFACTURER:
Morel TSCT 1044 tweeter
Categories: 0.75 - 2" (19-50mm) Dome Tweeters Morel Tweeters

PRICED AS A MATCHED PAIR.
The Morel TSCT 1044 is an advanced high-end 28mm silk dome tweeter from the Supreme range. Features include a Hexatech™ Aluminium voice coil, Neodymium flat pancake ring magnet, Titanium voice coil former, diecast alloy rear chamber and dual copper Faraday shorting rings (to negate rising impedance at higher frequencies). The dome assembly is hand coated with Acuflex damping compound and is field replaceable. Power handling is high at 200w. The TSCT 1044 has a very smooth, gently rising response; the critical 1.5kHz-10kHz band is held within 2.2 dB limits. A superb transducer.
Also available with 110mm faceplate : Morel TSCT 1104
A full datasheet can be downloaded from the bottom of this page.
Decoding Morel type numbers: TSCT= Titanium Supreme Coppersleeve Tweeter; 1044= 104mm faceplate, 4ohm impedance.
| Resonant frequency (fs) | 591 Hz | Nominal impedance (Zn) | 4 Ω |
| Effective diaphragm diameter | 28mm | DC resistance (Re) | 4.19 Ω |
| Ferrofluid ? Y/N | Yes | RMS power handling | 200W |
| Recommended crossover | 2.5khz | Faceplate diameter | 104 mm |
| Sensitivity (2.83V/1m) | 95 dB | Cutout hole diameter | 72.8 mm |
TSCT1044
Friendly technical support
40+ years in the trade
UK family run business
Excellent customer service
Quick dispatch
I tried this uprated capacitor through sheer curiosity and am pleasantly surprised with the results. So far, and not too many hours in, it’s giving a slightly smoother edge to the top end and has solved an issue I had regarding some hardness to the sound. I’m impressed enough that I’ll look to replace the mid range caps in the future.
New Foam covers supplies by WHF have completely changed the appearance- they look brand new! Great quality foam, very reasonably priced and quick delivery. Delighted with they now look and sound - will hang on to them forever now.
Excellent upgrade, works perfectly with the speakers it's just soldier and play, they takeaway the over intensity of the original tweeters.
I've had my Mission 734s for about 30 years and for the last five or so the bass units have been falling to pieces. I was about to take the speakers to the tip, but didn't have the heart knowing how capable these used to be. I did a little internet research and these Monacor replacements appeared to do the job. Next day delivery from Willys was impressive, as was the killer sound once the replacements were fitted (which was a simple job). I'd forgotten how these speakers make the windows rattle. Very happy customer!
Excellent service from Willys-Hifi. Caroline was very helpful and patient when answering my queries. Please be aware that some soldering is required when connecting the tweeters. Something I haven't done since I was at school over 40 years ago! They do sound good though, listening to Smoke on the Water as I write , wow 😆
