All systems go !
All systems go !
DRIVE UNITS BY MANUFACTURER:
Morel TSCT 1104 tweeter
Categories: 0.75 - 2" (19-50mm) Dome Tweeters Morel Tweeters
PRICED AS A MATCHED PAIR.
The Morel TSCT 1104 is an advanced high-end 28mm silk dome tweeter from the Supreme range. Features include a 110 mm faceplate, a Hexatech™ Aluminium voice coil, Neodymium flat pancake ring magnet, Titanium voice coil former, diecast alloy rear chamber and dual copper Faraday shorting rings (to negate rising impedance at higher frequencies). The dome assembly is hand coated with Acuflex damping compound and is field replaceable. Power handling is high at 200w. The TSCT 1104 has a very smooth, gently rising response; the critical 1.5kHz-10kHz band is held within 2.2 dB limits. A superb transducer.
Also available with 104mm faceplate : Morel TSCT 1044
A full datasheet can be downloaded from the bottom of this page.
Decoding Morel type numbers: TSCT= Titanium Supreme Coppersleeve Tweeter; 1104= 110mm faceplate, 4ohm impedance.
Resonant frequency (fs) | 591 Hz | Nominal impedance (Zn) | 4 Ω |
Effective diaphragm diameter | 28mm | DC resistance (Re) | 4.19 Ω |
Ferrofluid ? Y/N | Yes | RMS power handling | 200W |
Recommended crossover | 2.5khz | Faceplate diameter | 110 mm |
Sensitivity (2.83V/1m) | 95 dB | Cutout hole diameter | 72.8 mm |
TSCT1104
Friendly technical support
40+ years in the trade
UK family run business
Excellent customer service
Quick dispatch
Good service well packed
I've needed something like this for years, fantastic product and a lovely company to deal with. Won't be my last purchase from them
It was a nice experience to send the old filters to the UK (from the Netherlands) and get them surprisingly fast back (taking the overseas shipment into account). At first I did it wrong since I also replaced the drivers that could also be connected in a 4/6 Ohm (double coil). But after correcting and calibrating my receiver the speakers sounded great.
Thanks!
Used in a DIY LS3/5a project, with Morel CAT 298 tweeters and custom crossovers using ClarityCap CSAs. Super pleased with these woofers! I think they synergize well with the “live” thin-wall LS3/5a cabinets. The sound is neither bloated, nor thin, just revealing, spacious, and with very lifelike tone. I’m so happy with the results of this project and had a great buying experience with Willy’s. Thank you!!
I used this in custom LS3/5a speaker enclosures along with Monacor SPH-135AD woofers and custom crossovers using ClarityCap CSAs. The tweeters have a very pure sound, revealing microdetails and having a naturally smooth, response. The sound is never peaky or rough. I’m very happy with my purchase and with the service from Willys. Would buy from again for a future project!